Radio Scanner Interface

This forum is for the discussion of the development and use of third-party BaseStation radio interface libraries (.biu files). Kinetic cannot offer support on the use or development of these libraries. (Note:- This forum is *not* for the discussion of the actual use of the radio interface - that should go in the Discussion forum).

Moderators: admin, KineticChris, KineticDavid, Moderators

Post Reply
Posts: 1
Joined: November 21st, 2005, 6:59 pm
Location: Waddinxveen, Netherlands

Radio Scanner Interface

Post by cbl » June 16th, 2009, 6:16 pm

After much trial and error there still is no cennection between PC and R7000/CT-17. Cable and CT-17 checked OK.
In Menu item "Radio" remains grey.
Entered Radio License Key|||||||||||||||||||||||||||||||||||||||||||.
S/N SBS-1 is 000642.
Software version Firmware Beavis3 Build 301.

Firmware Options eight times Not Enabled. What is the meaning of this?

Radio toolbar buttons available but not reacting.

No Firmware Option License Code available. How can I obtain this Code?
SBS-1 is working very well.
Sincerily hoping this problem can be solved.
Many thanks.
C. Blom

User avatar
Posts: 1251
Joined: October 10th, 2007, 4:13 pm
Location: Kettering

Post by 40482A » June 16th, 2009, 6:24 pm

Suggest you remove the radio key from your post , over wise it may be used by others.
People have the right to be stupid, but some abuse that privilege !


User avatar
Posts: 930
Joined: July 12th, 2006, 1:50 pm
Location: Shrewsbury

Post by Allocator » June 16th, 2009, 6:30 pm

From the Kinetic website:

The latest release ships with interface libraries for the ICOM PCR1000,PCR 1500,IC7000, IC8500, the AOR 8200, AOR 8600 and the AOR 5000

Is the R7000 the same as the IC7000?

Post Reply